Domestic losses are a part and parcel of a regular household. Especially the kitchen utensils are bound to wear off with time or the glass cutlery can break into pieces if not handled properly. How often has it happened that your utensils have become damaged and rendered unusable well before their expected life time? Well, this case is quite common in metal utensils as they get deformed upon application of physical or thermal pressure. Most commonly, the metal plates bend and get out of shape when deformed, especially the metal plates that do not break easily. In the article that follows, we will look at a metal plate straightening machine.
The straightening machine is quite similar to the calendaring machine used in the later stages of paper manufacture. It uses huge amounts of mechanical pressure and applies it own the plate to be straightened. Due to the application of this vast amount of pressure, the plate’s deformed part settles down and become the same as the non-deformed part in appearance and after straightening, it gets quite difficult to distinguish between a straightened plate and an originally non- deformed plate. However, while operating the metal plate straightening machine, it is to be kept in mind that the pressure must be applied uniformly all over the machine, applying pressure non-uniformly will lead to improper formation of the plate and might leave the plate crooked. Also the pressure needs to be applied steadily to avoid over straightening or under straightening of any particular portion of the plate. The principle of this metal plate straightening machine is quite simple, it works on electric power and uses the electrical energy it receives and converts it into mechanical energy that is used to straighten the plate.
The straightening machine can be used for various other purposes like straightening pipes, straightening steel rods, straightening coils or mesh, etc. The basic procedure remains more or less the same in any straightening machine. It consists of cylindrical rolls and successive rolls rotate in opposite directions. The material that is to be straightened (be it a plate or a rod) is passed through these cylindrical rolls and as they apply mechanical pressure uniformly over the entire surface area of the material, the bending or non uniformity is overcome and the plate comes out as a straightened surface. If you want any special design on the circular borders or wish to uplift the borders of the plate then you can do so accordingly. These straightening machines are available aplenty and a large number of well established manufacturing companies have these plates on offer.
Precaution: While using a metal plate straightening machine or any other type, make sure that you do not get your fingers or hands stuck into it as it can lead to severe damage, the machine is built for hard and rigid objects like metal that can safely withstand large quantities of force.
Also keep checking for wear and tear of the machine as this decreases the efficiency and causes higher power consumption giving less productivity. If it needs to be oiled, keep the machine well oiled.
River Plate vs Instituto 2-0 GOLAZO Enzo Pérez | Copa Argentina 2017
Fuente: TYC Sports
Video Rating: / 5